i need stock ROM or custom ROM for APPTAB 7DC-8. TABLET is stuck on logo . the board id PBtext is M7012_RK3066_V2.5A.
any suggestion .
thanks in advance.
any suggestion .
thanks in advance.
Affichage des articles dont le libellé est Firmware... Afficher tous les articles
Affichage des articles dont le libellé est Firmware... Afficher tous les articles
dimanche 21 décembre 2014
samedi 20 décembre 2014
Firmware that flash on any version? Or how to unbrick? topic
Hi, all.
i have breaked device, i dont know what firmware on it. Only AP Fastboot works. I has been tryed to flash many firmwares what i can find but all of them failed to flash cdt.bin.
Is there any way to figure out which one i have and need or maybe i can install firmware that can be flashed on any other? thanks.
i have breaked device, i dont know what firmware on it. Only AP Fastboot works. I has been tryed to flash many firmwares what i can find but all of them failed to flash cdt.bin.
Is there any way to figure out which one i have and need or maybe i can install firmware that can be flashed on any other? thanks.
Rooting of Gionee Elife E3 Kitkat firmware topic
For a very safe rooting of Gionee Elife E3 Kitkat firmware :
1.Flash Philz Recovery attached with the help of spflash tool.
2.Boot into recovery
3.Go to Advanced Functions
4.Click Re-root System(SuperSu) and wait till process completed.
5.Reboot Device
6.Install SuperSu from Play Store.
7.Open SuperSu and update binary.
8.Reboot Device and enjoy rooted Gionee Elife E3
Download Philz Recovery from :http://forum.xda-developers.com/andr...ionee-t2957106
Note:Make a setting in recovery before doing procedure to avoid screen off. Go to Recovery Setting/GUI preference/Dim Screen Delay, tap until 0(Disabled) appears in value. do same procedure for ScreenOf Delay also.
In philz Recovery Sdcard0=Internal Storage
Sdcard1=External Storage(Sd Card)
1.Flash Philz Recovery attached with the help of spflash tool.
2.Boot into recovery
3.Go to Advanced Functions
4.Click Re-root System(SuperSu) and wait till process completed.
5.Reboot Device
6.Install SuperSu from Play Store.
7.Open SuperSu and update binary.
8.Reboot Device and enjoy rooted Gionee Elife E3
Download Philz Recovery from :http://forum.xda-developers.com/andr...ionee-t2957106
Note:Make a setting in recovery before doing procedure to avoid screen off. Go to Recovery Setting/GUI preference/Dim Screen Delay, tap until 0(Disabled) appears in value. do same procedure for ScreenOf Delay also.
In philz Recovery Sdcard0=Internal Storage
Sdcard1=External Storage(Sd Card)
[Q] Is it ok to flash original firmware alot of time and wiping ??? topic
;) post your best and reasonable answer thxzz and i appreciate :o
vendredi 19 décembre 2014
How I can back stock firmware Brick m7 topic
Htc One m7
Cıd htc 102
I using hasoon all one tollkıt relock bootlader
After ı dowloand 3 ruu files all error 155 ı cant understand.
I read other topic. Hboot is problem. How ı can back stock firmware now dont open phone... Thanks for help
Cıd htc 102
I using hasoon all one tollkıt relock bootlader
After ı dowloand 3 ruu files all error 155 ı cant understand.
I read other topic. Hboot is problem. How ı can back stock firmware now dont open phone... Thanks for help
[LINK] Original Firmware Images for Tab 4 7" SM-T230NU topic
Hello, here you can get the latest original Samsung firmware images for SM-T230NU, then you can flash them using Odin 3.9 or high.
The latest image available is from 7th November 2014
I will mirror latest image later.
Cheers! :highfive:
Cheers! :highfive:
New firmware 18.1.4.2.25 for Xperia T3 (D5103) topic
Hello,
PTCRB has annonced on 12/16/2014 the certification of a new firmware 18.1.A.2.25. The question is what's new ?
PTCRB has annonced on 12/16/2014 the certification of a new firmware 18.1.A.2.25. The question is what's new ?
jeudi 18 décembre 2014
[Q&A] Firmware Unpacker for Huawei topic
Q&A for Firmware Unpacker for Huawei
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Firmware Unpacker for Huawei. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Firmware Unpacker for Huawei. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
after firmware flash with tot my phone is constantly rebooting topic
after successful flash with tot of my d801 with tot LG D801AT-01-V10c-310-260-AUG-13-2013 my phone without an imei has has bin constantly rebooting. i canonly use it for a couple of minutes. in wch it refuses to install anything. any help:confused::confused::confused:
Downgrading from official firmware topic
Sprint ls990 version has update about a week ago and its terrible. Im not shocked it wasnt lollipop but it has so many flaws. My main two problems is my phone is super laggy!! And makes it near impossible to text. Secondly my battery life use to be amazing i use to only have to charge once a day. Now i can barely get through a school day now without having to get the charger.
Now I'm not rooted so how do i downgrade without ruining my warranty and does anybody else experiencing these "update" problems.
Sent from my LGLS990 using XDA Free mobile app
Now I'm not rooted so how do i downgrade without ruining my warranty and does anybody else experiencing these "update" problems.
Sent from my LGLS990 using XDA Free mobile app
"Firmware Upgrade Encountered An Issue" making me suicidal.... topic
Please help with this non-sense...
So I did a factory reset on my rooted gs4 and now it's stuck on this stupid screen...
Odin keeps failing(No PIT partition) and I want to be able to just flash a custom rom instead of going into stock rom using kies....
Can anyone help me on this please? You'd be doing me a serious favor.
So I did a factory reset on my rooted gs4 and now it's stuck on this stupid screen...
Odin keeps failing(No PIT partition) and I want to be able to just flash a custom rom instead of going into stock rom using kies....
Can anyone help me on this please? You'd be doing me a serious favor.
dimanche 14 décembre 2014
N900T Network issues, firmware or hardware? topic
Hi Guys!
I recently purchased a used Galaxy note 3 Tmobile variant model N900T. The phone was sold as unlocked and the seller assured me it was fully functional and recently used on the T-mobile network.
Since I received the phone I have had severe network issues using my T-mobile simcard. The network issues are as follows.
Data network stuck on EDGE.
Voice Network disconnects usually after the first phone call, the phone call itself will not disconnect and is stable but once it is ended the modem seems to lock up or reset i'm not sure which one but it could be an hour or more before the voice network will come back. Sometimes a reboot of the phone helps but not always. When this happens I will receive a NOT REGISTERED ON NETWORK ERROR or OUT OF SERVICE AREA.
NOTE: As I'm writing this it is 2am, in LA, California and I have just managed to make 5 calls in a row with no disconnection which is a first! I have noticed however that there is no data service, not even edge, could this be related in some way?
I have done the following.
Contacted T-mobile, they checked everything including IMEI, APN settings, and confirmed no blacklisting or network issues.
Checked that the IMEI number on the label and OS match.
Replaced sim
Tested the phone in different high signal LTE covered area's (Los Angeles)
Used my current sim in various phones, S3, Iphone4, S3 mini. All without voice or data issues, apart from the international S3 LTE which was stuck on EDGE also.
Re flashed various official stock T-mobile firmwares using ODIN. Such as N900TUVUDNF1, N900TUVUDNF4, N900TUVUDNF9, N900TUVUDNK3 and I also believe N900TUVUCNB4 with similar results.
Currently using N900TUVUDNF4
I have pretty much run out of idea's at this point, and decided to post here as a last resort. The seller is telling me that the phone has always worked fine for him and that he does not take refunds. Its all quite suspicious I am starting to believe that this phone has some kind of intermittent fault on the modem. I am hoping there is something that I might have overlooked on my end or some kind of test I can perform here to confirm a hardware fault.
Thanks for the support.
I recently purchased a used Galaxy note 3 Tmobile variant model N900T. The phone was sold as unlocked and the seller assured me it was fully functional and recently used on the T-mobile network.
Since I received the phone I have had severe network issues using my T-mobile simcard. The network issues are as follows.
Data network stuck on EDGE.
Voice Network disconnects usually after the first phone call, the phone call itself will not disconnect and is stable but once it is ended the modem seems to lock up or reset i'm not sure which one but it could be an hour or more before the voice network will come back. Sometimes a reboot of the phone helps but not always. When this happens I will receive a NOT REGISTERED ON NETWORK ERROR or OUT OF SERVICE AREA.
NOTE: As I'm writing this it is 2am, in LA, California and I have just managed to make 5 calls in a row with no disconnection which is a first! I have noticed however that there is no data service, not even edge, could this be related in some way?
I have done the following.
Contacted T-mobile, they checked everything including IMEI, APN settings, and confirmed no blacklisting or network issues.
Checked that the IMEI number on the label and OS match.
Replaced sim
Tested the phone in different high signal LTE covered area's (Los Angeles)
Used my current sim in various phones, S3, Iphone4, S3 mini. All without voice or data issues, apart from the international S3 LTE which was stuck on EDGE also.
Re flashed various official stock T-mobile firmwares using ODIN. Such as N900TUVUDNF1, N900TUVUDNF4, N900TUVUDNF9, N900TUVUDNK3 and I also believe N900TUVUCNB4 with similar results.
Currently using N900TUVUDNF4
I have pretty much run out of idea's at this point, and decided to post here as a last resort. The seller is telling me that the phone has always worked fine for him and that he does not take refunds. Its all quite suspicious I am starting to believe that this phone has some kind of intermittent fault on the modem. I am hoping there is something that I might have overlooked on my end or some kind of test I can perform here to confirm a hardware fault.
Thanks for the support.
[Q] after unlocking bootloader, do i have to install original firmware topic
dear members,
i m using xperia m c1904 - andorid 4.3
í m new at unlocking bootloader. but i just learned it from your post that how i can unlock bootloader.
but i still want to know that after unlocking bootloader , do i have to install sony 4.3 operating system?
please help me.
i m using xperia m c1904 - andorid 4.3
í m new at unlocking bootloader. but i just learned it from your post that how i can unlock bootloader.
but i still want to know that after unlocking bootloader , do i have to install sony 4.3 operating system?
please help me.
[Q] Possible to backup the Stock firmware on Z3? topic
Since we have no root, is it possible to backup the Stock 23.0.A.2.93 firmware?
I did try a adb backup command on the Z1, but dont know if it works on Z3.
I did try a adb backup command on the Z1, but dont know if it works on Z3.
samedi 13 décembre 2014
firmware and odin help on my l720t topic
well i did a update with odin to get root back cuz i lost it due to knox and it said firmware upgrade encountered an issue. now it wont let me boot up the when i download the stock l720t firmware from sammobile odin wont get passed the write part with out saying Complete(Write) operation failed. what am i supposed to do now? ive used 3 diffrent odins and reinstalled my drivers. i just dont know plz help..
also it says odin mode write protect enabled and bust mode enabled
also it says odin mode write protect enabled and bust mode enabled
need custom firmware for gt i9300 india help topic
Plz any one give me link of original firmware for s3 gt i9300 India.
I found everywhere but no luck.links are dead.plz debs help me my s3 is
Halfbricked.
I found everywhere but no luck.links are dead.plz debs help me my s3 is
Halfbricked.
[Q] How to install ank4 firmware? topic
I'm dont know where to find the ank4 firmware to flash with odin.
[Q] Latest firmware package? topic
Could someone advise me on which firmware package is the latest for the H/K edition. I would prefer to keep original hboot unless update is required. Thanks.
[Q] CX919 II Firmware topic
Hey guys,
Hopefully someone can help me...
Background: I bought this CX919 II, setup the device so that it displays in 1080p, install XBMC, and it only shows 720p. Do a bit of reading and find out that it's probably upscaling and there's a separate 1080p firmware, so of I go...
Problem: So I flash the stick with the steps below, everything seems to go okay, except when I plug the stick back into the tv, nothing happens... How do I get my device back? :(
1 ) Download Rockchip Batch Tool and extract
2 ) Put the USB cable into theOTG port of the CX919 II, hold the reset button and plug it into the pc.
3 ) Windows looks for driver, I send it to the correct location, it finds the drivers, no problem
4) Add SUPPORTLOWUSB=TRUE and FULLSPEEDUSB=TRUE to the config.ini file (otherwise it doesn't detect the device)
5 ) Start Rockchip Batch Tool v1.7. It finds the device and shows a green box
6) I select the 1080p firmware (which I got here)
7) Click on the restore button and wait patiently for the success message
8) Success message is displayed.
9) Unplug device, plug device into tv
10) Device has power, but tv tells me that there is no device connected.
So, where did I go wrong? And how can I fix the device?
Hopefully someone can help me...
Background: I bought this CX919 II, setup the device so that it displays in 1080p, install XBMC, and it only shows 720p. Do a bit of reading and find out that it's probably upscaling and there's a separate 1080p firmware, so of I go...
Problem: So I flash the stick with the steps below, everything seems to go okay, except when I plug the stick back into the tv, nothing happens... How do I get my device back? :(
1 ) Download Rockchip Batch Tool and extract
2 ) Put the USB cable into theOTG port of the CX919 II, hold the reset button and plug it into the pc.
3 ) Windows looks for driver, I send it to the correct location, it finds the drivers, no problem
4) Add SUPPORTLOWUSB=TRUE and FULLSPEEDUSB=TRUE to the config.ini file (otherwise it doesn't detect the device)
5 ) Start Rockchip Batch Tool v1.7. It finds the device and shows a green box
6) I select the 1080p firmware (which I got here)
7) Click on the restore button and wait patiently for the success message
8) Success message is displayed.
9) Unplug device, plug device into tv
10) Device has power, but tv tells me that there is no device connected.
So, where did I go wrong? And how can I fix the device?
Inscription à :
Articles (Atom)
