i have a bricked sprint lg g2 (rooted) is there a way to fix it other than flash the 2 giga rom with lg tool because i am in an isolated area with very limited speed thank you
Affichage des articles dont le libellé est bricked. Afficher tous les articles
Affichage des articles dont le libellé est bricked. Afficher tous les articles
mardi 6 janvier 2015
dimanche 4 janvier 2015
[Q&A] [Q] A question that bricked my mind topic
Q&A for [Q] A question that bricked my mind
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Q] A question that bricked my mind. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Q] A question that bricked my mind. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
Bricked APX mode topic
Hi guys
Today my tablet froze completly and had to shut it down from the button but after that it wont wake up. tried every combination and read some threads around here with the same isue. i even reinserted the battery but it still wont turn on and dosent display the charging battery animation. when i plug it to the pc it shows up as APX. is there a way to nvlash it? to flash the bootloader again. I have my n7 2012 for almost 2 years now and waranty had expired.
Today my tablet froze completly and had to shut it down from the button but after that it wont wake up. tried every combination and read some threads around here with the same isue. i even reinserted the battery but it still wont turn on and dosent display the charging battery animation. when i plug it to the pc it shows up as APX. is there a way to nvlash it? to flash the bootloader again. I have my n7 2012 for almost 2 years now and waranty had expired.
samedi 3 janvier 2015
[Q] [Mi-2] Bricked topic
Hi All,
My Mi-2 is bricked and stay on a black screen
I still have the QUALCOOM HS-USB ...... visible in the windows device manager and the COM port is visible in Mi-Flash..
but from there i am lost and don't know what to do.
can you please assist
thanks
My Mi-2 is bricked and stay on a black screen
I still have the QUALCOOM HS-USB ...... visible in the windows device manager and the COM port is visible in Mi-Flash..
but from there i am lost and don't know what to do.
can you please assist
thanks
jeudi 1 janvier 2015
[Q] htc one google edition bricked topic
i have one google edition hano on logo with this info
i try too unlock bootloader with htcdev but bootloader not unlocked
i try too write this rom with flashman
OTA_M7_UL_L50_STOCK_UI_MR_Google_WWE_5.11.1700.3-4.09.1700.1_LRX22C.H3_release_403340.zip
but no success and show failed
pls help me
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4T.27.3218.09
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.09.1700.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT36SW913568
INFOimei: 354439050683343
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: GOOGL001
INFObattery-status: good
INFObattery-voltage: 3791mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-e02a9046
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!i try too write this rom with flashman
OTA_M7_UL_L50_STOCK_UI_MR_Google_WWE_5.11.1700.3-4.09.1700.1_LRX22C.H3_release_403340.zip
but no success and show failed
pls help me
mardi 30 décembre 2014
HTC One M8 bricked topic
Hi, a friend as a joke decided to go into TWRP and do an advanced wipe and ticked every single partition and wiped my phone.
Now there is no OS/USB port etc and when i turn my phone on normally it gets onto the HTC bootup screen but is stuck so I'm unable to turn it off until the battery runs out, however, im still able to enter TWRP which is running v2.7.0.2.
I live in Australia and am with Optus, how can i re-install my OS? IDM if it's still rooted or it's back to factory state.
Thanks
Now there is no OS/USB port etc and when i turn my phone on normally it gets onto the HTC bootup screen but is stuck so I'm unable to turn it off until the battery runs out, however, im still able to enter TWRP which is running v2.7.0.2.
I live in Australia and am with Optus, how can i re-install my OS? IDM if it's still rooted or it's back to factory state.
Thanks
Htc one m7 [bricked] topic
Hi,
I have a sprint HTC one m7 and I was trying to install the stock ROM, but the RUU failed and I bricked my device.
HELP!!!!
I have a sprint HTC one m7 and I was trying to install the stock ROM, but the RUU failed and I bricked my device.
HELP!!!!
[Q] I think I bricked my att s4 topic
Hi everyone I have an att s4 that i was able to root and install safe strap, I did not make any back up and accidently install a tmobile insane kikkat on it, now the phone wont boot it just stays on the s4 screen, i try to unroot it using odin but it fails every time, I am lost can anyone tell me if I could still fix this phone or is completelly bricked, thanks in advance for all your help, I am able to get into the bootstrap
dimanche 28 décembre 2014
Bricked my Device? topic
Hey
I unlocked my bootloader easylie but I tried the how to from ejdan
With the sgp611 insecure from post 3 but after fastboot boot z3tc... It started just normal but like an Factory reset. So After that I tried the how to from post 25# with twrp and After Point 3 my Device doesnt Start anymore :( I was waiting 25minutes but nothing Happens and ADB Shell Sayd no device found.
Have I to throw my device into the trash?
Please help me.
I unlocked my bootloader easylie but I tried the how to from ejdan
With the sgp611 insecure from post 3 but after fastboot boot z3tc... It started just normal but like an Factory reset. So After that I tried the how to from post 25# with twrp and After Point 3 my Device doesnt Start anymore :( I was waiting 25minutes but nothing Happens and ADB Shell Sayd no device found.
Have I to throw my device into the trash?
Please help me.
samedi 27 décembre 2014
anybody able to fix a bricked fire tv? topic
hi there. I have somehow managed to brick my fire tv that had rbox cwm mod on it. I have tried numerous times to repair it using the alt-printscreen-i method without any luck other than the unit rebooting to indicate keyboard is recognised. I just get a constant white amazon logo on boot up. This is a u.s purchased fire tv that I own in the uk. was just curious to see if anyone of you clever folk out there would like to take a look at the unit and see if it can be recovered for me before I throw it out :(
am willing to post with the idea if it can be fixed I'd obviously pre-pay for return postage.
anyway, just thought I'd enquire as I've given up trying
paul
am willing to post with the idea if it can be fixed I'd obviously pre-pay for return postage.
anyway, just thought I'd enquire as I've given up trying
paul
vendredi 26 décembre 2014
[Q] pretty sure my watch is bricked. any ideas? topic
here is what is happening. i recorded a video.
i have also found that holding the button while it's on the charger will put it into the bootloader, but that doesn't really help me.
is there anything i can do or am i screwed and have to get a replacement? here is what was suggested to me on reddit:
i have it off the charger for now. any ideas? thanks in advance!
i have also found that holding the button while it's on the charger will put it into the bootloader, but that doesn't really help me.
is there anything i can do or am i screwed and have to get a replacement? here is what was suggested to me on reddit:
i have it off the charger for now. any ideas? thanks in advance!
[Q] Hard bricked G2 won't appear in /dev/sdb* on linux topic
I was trying this to fix a hard-bricked G2 I just recieved:
http://forum.xda-developers.com/show....php?t=2582142
The device is in the following state:
No download mode
No recovery mode
Shows qhsusb_bulk in lsusb -v
I don't know much more about it (e.g. I don't know if it was rooted or what type of ROM was on it).
I need to unplug the battery by removing the back cover to have a chance to reboot it. The first boot after that it shows the LG logo, then a blank screen (back lit but no text).
(UPDATE: Pressing the power button 8 seconds also reboots the phone without having to unplug the battery).
When I wire it up to my Arch Linux computer here is what the command `dmesg` shows:
Note the "config 1 has an invalid interface number: 20 but max is 1" error, and all the Buffer I/O errors.
Here is the relevant section of `lsusb -v`
Is there anything that could be done to fix these Buffer I/O errors so I can mount the phone (and continue with the FIX tutorial posted above)?
Anyone able to shed some lights on the meaning of these lines would be of great help in my quest of learning how to unbrick my phone.
Note: when connected to the computer the blank screen goes in a repeating cycle of being back lit for 1 second then no backlights for 1 second. The cycle stops (with backlights) when unplugging the phone.
http://forum.xda-developers.com/show....php?t=2582142
The device is in the following state:
No download mode
No recovery mode
Shows qhsusb_bulk in lsusb -v
I don't know much more about it (e.g. I don't know if it was rooted or what type of ROM was on it).
I need to unplug the battery by removing the back cover to have a chance to reboot it. The first boot after that it shows the LG logo, then a blank screen (back lit but no text).
(UPDATE: Pressing the power button 8 seconds also reboots the phone without having to unplug the battery).
When I wire it up to my Arch Linux computer here is what the command `dmesg` shows:
Code:
[ 3693.728255] usb 1-2: new high-speed USB device number 93 using xhci_hcd
[ 3693.901772] usb 1-2: config 1 has an invalid interface number: 20 but max is 1
[ 3693.901784] usb 1-2: config 1 has no interface number 1
[ 3693.903319] usb-storage 1-2:1.20: USB Mass Storage device detected
[ 3693.903868] scsi host843: usb-storage 1-2:1.20
[ 3694.905067] scsi 843:0:0:0: Direct-Access Qualcomm MMC Storage 1.00 PQ: 0 ANSI: 2
[ 3694.906568] sd 843:0:0:0: [sdb] 30777344 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 3694.906872] sd 843:0:0:0: [sdb] Write Protect is off
[ 3694.906883] sd 843:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[ 3694.907373] sd 843:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3694.919101] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 sdb22 sdb23 sdb24 sdb25 sdb26 sdb27 sdb28 sdb29 sdb30 sdb31 sdb32 sdb33 sdb34 sdb35 sdb36
[ 3694.923664] sd 843:0:0:0: [sdb] Attached SCSI disk
[ 3695.061360] usb 1-2: USB disconnect, device number 93
[ 3695.065521] sd 843:0:0:0: [sdb] Synchronizing SCSI cache
[ 3695.065552] sd 843:0:0:0: [sdb]
[ 3695.065554] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.065557] sd 843:0:0:0: [sdb] CDB:
[ 3695.065558] cdb[0]=0x28: 28 00
[ 3695.065562] sd 843:0:0:0: [sdb]
[ 3695.065563] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.065565] sd 843:0:0:0: [sdb] CDB:
[ 3695.065566] cdb[0]=0x28:
[ 3695.065567] 00 00 00
[ 3695.065569] 28
[ 3695.065571] 00
[ 3695.065571] 00
[ 3695.065572] 00
[ 3695.065573] 01
[ 3695.065573] 70
[ 3695.065574] 00
[ 3695.065574] 00
[ 3695.065575] 90
[ 3695.065576] 00
[ 3695.065578] end_request: I/O error, dev sdb, sector 368
[ 3695.065579] 80 00 00 f0 00
[ 3695.065582] quiet_error: 134 callbacks suppressed
[ 3695.065583] Buffer I/O error on device sdb, logical block 46
[ 3695.065586] Buffer I/O error on device sdb, logical block 47
[ 3695.065587] Buffer I/O error on device sdb, logical block 48
[ 3695.065589] end_request: I/O error, dev sdb, sector 128
[ 3695.065590] Buffer I/O error on device sdb, logical block 16
[ 3695.065592] Buffer I/O error on device sdb, logical block 49
[ 3695.065594] Buffer I/O error on device sdb, logical block 17
[ 3695.065595] Buffer I/O error on device sdb, logical block 50
[ 3695.065597] Buffer I/O error on device sdb, logical block 51
[ 3695.065598] Buffer I/O error on device sdb, logical block 52
[ 3695.065599] Buffer I/O error on device sdb, logical block 18
[ 3695.065633] sd 843:0:0:0: [sdb]
[ 3695.065636] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.750741] usb 1-2: new high-speed USB device number 94 using xhci_hcd
[ 3695.924146] usb 1-2: config 1 has an invalid interface number: 20 but max is 1
[ 3695.924151] usb 1-2: config 1 has no interface number 1
...Here is the relevant section of `lsusb -v`
Code:
Bus 001 Device 054: ID 05c6:9006 Qualcomm, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05c6 Qualcomm, Inc.
idProduct 0x9006
bcdDevice 0.00
iManufacturer 1 LG Electronics Inc.
iProduct 2 QHSUSB__BULK
iSerial 3 1234567890ABCDEF
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 55
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 20
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)Is there anything that could be done to fix these Buffer I/O errors so I can mount the phone (and continue with the FIX tutorial posted above)?
Anyone able to shed some lights on the meaning of these lines would be of great help in my quest of learning how to unbrick my phone.
Note: when connected to the computer the blank screen goes in a repeating cycle of being back lit for 1 second then no backlights for 1 second. The cycle stops (with backlights) when unplugging the phone.
Bricked Tab 2 7.0 3113 topic
I bought a used Stock Tab 2 7.0 P3113 for my kids to play Minecraft on and keep them off of my tablet. Turned it on at time of purchase and the tablet worked fine, I charged it up for the kids and left it in the box for a few days. When I grabbed it again it looked like the battery was already dead, after charging it and turning it on I only got a black screen after the Tab 2 logo. I followed the steps on http://forum.xda-developers.com/show....php?t=1722745 to restore stock rom after reading that fixed this problem for others. Only problem is the link to his stock rom and pit file is broke. I used the pit file from http://forum.xda-developers.com/show....php?t=2552155 and found the stock rom from a share site that had the same file name that was linked to in the instructions without the pit file. Tried installing rom without re-partitioning and still had a black screen. Tried with partition and now I am stuck in a boot loop with the Tap2 logo. Also I can no longer get into recovery, but can get into download mode. Any help would be much appreciated or this thing has a date with a sledge hammer tonight. Thanks.
[Q] AFTV hangs at white logo. Did I just bricked it? topic
Hey guys,
I was just doing the process to flash the pre rooted update, I used the AFTV Utility.
The steps:
1 - Unlocked bootlader OK
2 - Changed the bootloader OK
3 - Change recovery PROBLEM
After I changed the recovery, it restarted and now hangs at white logo in startup. Tried the print screen/sys but nothing happened, the funny thing it's that it seems not to be powering USB connection since the keyboard just doesn't even light up or any of the leds when connected (like the num lock led).
Thanks in advance for any help.
I was just doing the process to flash the pre rooted update, I used the AFTV Utility.
The steps:
1 - Unlocked bootlader OK
2 - Changed the bootloader OK
3 - Change recovery PROBLEM
After I changed the recovery, it restarted and now hangs at white logo in startup. Tried the print screen/sys but nothing happened, the funny thing it's that it seems not to be powering USB connection since the keyboard just doesn't even light up or any of the leds when connected (like the num lock led).
Thanks in advance for any help.
LG Optimus 3D P920 Completely Bricked. topic
Good evening all, My last hopes stands here guys. I have an LG Optimus 3D p920, which is completely bricked. I can't access download mode anymore, actually there is no signs of life on the phone. I searched alot on google and found this: http://forum.xda-developers.com/show....php?t=1942836 . I successfully installed all drivers (Changing port to 41, ETC...), and can enter Download, and fastboot mode Using OmapBoot, and OS_Hacking.
When it comes to lgflashtool, I select the BOOTV21E_AP.bin and the LGP920_110622.dll, and selecting port 1 and 10, And start. It says ready, I enter download mode using the omapBoot, And it starts. The log looks good till It reaches to:set capabilities to be used, Baudrate Change: 115200bps ===> 3000000, set flash id error, Error WM_PROGRESS_MSG, Error WM_PROGRESS_MSG, FAIL. I tried smartflash, same. I used os_Hacking [All-In-One][P920].bat, When I try flashing anything from the list, it gives me the following error: failed (remote partition does not exist) . Please Help, and thank you for your time.
When it comes to lgflashtool, I select the BOOTV21E_AP.bin and the LGP920_110622.dll, and selecting port 1 and 10, And start. It says ready, I enter download mode using the omapBoot, And it starts. The log looks good till It reaches to:set capabilities to be used, Baudrate Change: 115200bps ===> 3000000, set flash id error, Error WM_PROGRESS_MSG, Error WM_PROGRESS_MSG, FAIL. I tried smartflash, same. I used os_Hacking [All-In-One][P920].bat, When I try flashing anything from the list, it gives me the following error: failed (remote partition does not exist) . Please Help, and thank you for your time.
[Q] Bricked TF300TG, ładuje się TWRP, nie ma FCK, nie ma SD topic
Mam Asus TF 300TG.
Bootloader odblokowany.
Miałem CWM zmieniałem na TWRP i coś się nie powiodło.
Po restarcie startuje tylko TWRP, nie mogą wejść w FCK (nie działa vol down)
TWRP jednak nie widzi żadnych pamięci sd, minisd, żadych wewnętrznych, nie potrafi zrobić mounta.
Nie mogę użyc fastboota ani ADB bo one nie widzą urządzenia.
Mogę wejść w tryb APX, windows rozpoznaje jako transformer APX mode. Sterownik naked driver mam zainstalowany.
Próbowałem użyć EasyFlasher, ale nie powiodło się
Pytania
- może w TWRP mogę wejść w tryb widoczny dla fastboota, adb?
- jak użyć nvflasha, wheelie ? jakie parametry, pliki
- co mogę zrobić innego?
Poświęciłem już wiele godzin, nic się nie powiodło.
Nie mam pomysłu.
Bootloader odblokowany.
Miałem CWM zmieniałem na TWRP i coś się nie powiodło.
Po restarcie startuje tylko TWRP, nie mogą wejść w FCK (nie działa vol down)
TWRP jednak nie widzi żadnych pamięci sd, minisd, żadych wewnętrznych, nie potrafi zrobić mounta.
Nie mogę użyc fastboota ani ADB bo one nie widzą urządzenia.
Mogę wejść w tryb APX, windows rozpoznaje jako transformer APX mode. Sterownik naked driver mam zainstalowany.
Próbowałem użyć EasyFlasher, ale nie powiodło się
Pytania
- może w TWRP mogę wejść w tryb widoczny dla fastboota, adb?
- jak użyć nvflasha, wheelie ? jakie parametry, pliki
- co mogę zrobić innego?
Poświęciłem już wiele godzin, nic się nie powiodło.
Nie mam pomysłu.
jeudi 25 décembre 2014
[Q] My xperia go got bricked topic
I tried to install CM11 on my xperia go .. Everything went smooth .. Rooted my phone nd install cwm recovery but wen i tried to install cm11.zip file error was shown .. I tried again nd again .. My xperia didnt start after that .. It was stuck in bootloader .. Then again i went into recovery mode nd tried flashing my stock rom backup but i installed wrong backup (moto e) then my phone got bricked .. No bootloader image .. Tried to install manual update thru fastboot but pc didnt recognise d device anymore .. Cant get into recorvery too .. Pls help me thnks in advice .. I hope i get some help for dev :'(
GT-S6310N bricked during root? topic
Hi,
I was following the instructions at rootmyandroid dot org/how-to-root-unroot-samsung-galaxy-young.html (sorry the forum won't allow me to post a direct link) to root my GT-S6310N, specifically the part after "rooting the GT-S6310N". The rest of the article talks about just S6310 without the "N", so I thought that'd be the instructions I should follow. Above it it also says "Only For Samsung Galaxy Young S6301 Owners", so it might have been the wrong process after all..?
Regardless, as per the instructions, I installed Odin 3.07, booted into Download Mode, ran Odin, and it reported a success (see attached screenshot). The device then booted as normal on its own, and when done, I did a normal shutdown, and booted into Recovery Mode. At this point I realized I don't have a microSD card in the device for the "UPDATE-SuperSU-v1.41.zip" file, so I selected "reboot" and the device again booted normally.
At this point I opened up the plastic back cover of the phone, and to my dismay, the battery fell out. I didn't think anything of it, and proceeded to look for a microSD card I could use. I didn't in fact find one, so I thought I'd boot the device up and figure out something else. But after carefully placing the battery and back cover back on, the device won't power up anymore. It won't vibrate, the display doesn't come on, nothing. If I plug it into a power outlet it doesn't show any signs of life. None of the Download/Recovery mode key combos work, either. Odin doesn't react to the device being plugged in in any way.
I guess I'm already willing to accept I managed to brick the device, but since I've successfully rooted 3 or 4 ones before, I'd like to at least understand what I did wrong. I've been under the impression that while many things can (and will) go wrong during rooting/CWM installation, most situations are recoverable (I've gotten devices e.g. stuck to a boot loop before).
At first I was convinced there must have been some physical damage done to the phone/battery when I opened the back cover, but after a careful inspection I can't see anything wrong with it. I've tried putting it back together at least 5 times. Also it should be noted that the battery fell out onto a soft couch, so I'm pretty sure it's not damaged in any way.
Any pointers welcome as to what went wrong and/or something I could still try. :/
I was following the instructions at rootmyandroid dot org/how-to-root-unroot-samsung-galaxy-young.html (sorry the forum won't allow me to post a direct link) to root my GT-S6310N, specifically the part after "rooting the GT-S6310N". The rest of the article talks about just S6310 without the "N", so I thought that'd be the instructions I should follow. Above it it also says "Only For Samsung Galaxy Young S6301 Owners", so it might have been the wrong process after all..?
Regardless, as per the instructions, I installed Odin 3.07, booted into Download Mode, ran Odin, and it reported a success (see attached screenshot). The device then booted as normal on its own, and when done, I did a normal shutdown, and booted into Recovery Mode. At this point I realized I don't have a microSD card in the device for the "UPDATE-SuperSU-v1.41.zip" file, so I selected "reboot" and the device again booted normally.
At this point I opened up the plastic back cover of the phone, and to my dismay, the battery fell out. I didn't think anything of it, and proceeded to look for a microSD card I could use. I didn't in fact find one, so I thought I'd boot the device up and figure out something else. But after carefully placing the battery and back cover back on, the device won't power up anymore. It won't vibrate, the display doesn't come on, nothing. If I plug it into a power outlet it doesn't show any signs of life. None of the Download/Recovery mode key combos work, either. Odin doesn't react to the device being plugged in in any way.
I guess I'm already willing to accept I managed to brick the device, but since I've successfully rooted 3 or 4 ones before, I'd like to at least understand what I did wrong. I've been under the impression that while many things can (and will) go wrong during rooting/CWM installation, most situations are recoverable (I've gotten devices e.g. stuck to a boot loop before).
At first I was convinced there must have been some physical damage done to the phone/battery when I opened the back cover, but after a careful inspection I can't see anything wrong with it. I've tried putting it back together at least 5 times. Also it should be noted that the battery fell out onto a soft couch, so I'm pretty sure it's not damaged in any way.
Any pointers welcome as to what went wrong and/or something I could still try. :/
[Q] My xperia go bricked topic
I tried to install CM11 on my xperia go .. Everything went smooth .. Rooted my phone nd install cwm recovery but wen i tried to install cm11.zip file error was shown .. I tried again nd again .. My xperia didnt start after that .. It was stuck in bootloader .. Then again i went into recovery mode nd tried flashing my stock rom backup but i installed wrong backup (moto e) then my phone got bricked .. No bootloader image .. Tried to install manual update thru fastboot but pc didnt recognise d device anymore .. Cant get into recorvery too .. Pls help me :( thnks in advice .. I hope i get some help for dev :'(
Soft Bricked Xolo Q1000 after flashing with SP Flash tool topic
My phone refuses to boot after I flashed stock Rom through SP Flash Tool. I didn't get any error during flashing. but as soon as I powered on the device I could see nothing but a black screen with hazy lines, after few seconds or so phone is getting restart.
I have tried different Roms and versions of SP Flash tool but with no success.
Tried both Roms from: http://www.needrom.com/download/xolo-q1000
Please help!
I have tried different Roms and versions of SP Flash tool but with no success.
Tried both Roms from: http://www.needrom.com/download/xolo-q1000
Please help!
Inscription à :
Articles (Atom)
