Affichage des articles dont le libellé est dead. Afficher tous les articles
Affichage des articles dont le libellé est dead. Afficher tous les articles

vendredi 26 décembre 2014

[Q] Dead battery, no charging, no warning, no vibrating,.... topic






Dear xda

On the 23th of December my phone ran out of battery % . So it was at 0%. I couldn't charge it until the day after. On the 24th when i put the phone in the original wall charger, It gave me the warning that I had to let it charge for a while before power on. I left it alone for about two hours, after that I pulled it out to see if it turned on, because I needed my phone, but nothing came out of it, I plugged it back in, and still nothing, not even a vibrate nor the warning message of the low battery level...

The phone was dead to my concern after Goolging a little and looking into the forums, I saw two persons with the same issue as me.

The first person () solved it leaving it 24h for nothing so the battery could rest for a while and yesterday evening (after leaving it for +- 25h)I plugged it in but nothing showed up, not even the warning message, as mentioned before, but with still good hope I left the phone charge overnight, but this morning, still nothing out of the phone.

The second person (https://forums.oneplus.net/threads/o...-solved.41777/) I was talking about had a more drastic solution, he opened up his phone, unscrewed the motherboard plate, disconnected the battery and reconnected it. This morning I was prepared to do it, but when I removed the back cover of my phone I saw the screws, but also the sticker and the rubbers (with behind them I assume more screws?), but since you first have to remove the rubbers and the sticker to unscrew those screws I am affraid I will lose warranty....

Can you please help me out, because I would love to use my beloved Oneplus again.
Do you have other possible solutions/fixes? Can I remove the sticker and the rubbers WITHOUT LOSING WARRANTY?

Sincerely Greetings

Bjorn Derudder
A proud member of the OnePlus Family!

P.S. : My phone is Rooted, Unlocked and has Stock CM12 (but I don't see any problems here because, that does not void any warranty ;) ), but nothing special was flashed or done to the phone right before the problems showed up, I mostly think of a faulty battery, or dead battery.

I posted this also on oneplus forums, but more help is alwaya appreciated ;)
Here is the link : https://forums.oneplus.net/threads/d...essage.216124/






jeudi 25 décembre 2014

[Q] Samsung LED Smart TV UN32F6400AW Dead topic






Hi Developers!

I just bought Samsung LED Smart TV UN32F6400AW. Actually my LED was working too slow so i tried to attempt factory reset. But when i did it's completely broken and dead (Only showing some garbish screen). Now i want to reinstall android on it with firmwares etc. Can anybody please help me what to do? Kindly share relevant files with me including step by step procedure. I would really like to thanks if some one take me out from this problem






[Q] Hard-bricked Kindle Fire (power controller is dead)? topic






I've got a problem with KF. It was unused for 2 or 3 months and looked like fully discharged. I tried to charge it with low-amper charger (5V, 0.55 mA), got it stuck for 5-sec bootloop.
.
Leaved it for 2-3 minutes and KF totally turned off, without any reaction on power button (no powering on, no charge indicator). Got original 1.8A charger - no luck. Tried hard reset (from 30 sec to 5 mins) - no luck. Tried different chargers from 0.55 to 2.1A - no luck.
Tried usbboot trick - no luck (firekit stuck on waiting for device, lsusb shows nothing).

Disassembled and reinstall battery connecter shows the same result. Leaved it on charger through usb-ampermeter, it showed power consumption 0.6A with battery attached and 0.2A without battery. After battery being charged for 8 hours ampermeter shows power consumtion in 0.2A (so battery looks like fully charged). Disassembled battery connection and measured voltage between first black battery (from black cords to red cords) and 3rd red battery cord (from red cords to black cords) - it shows 4.2V, so battery looks like fully charged.

Now i have such symptoms:
- No reaction with usb cable attached (both wallet and computer 0.5A usb)
- Powers on by single press (power button light for 2 seconds, display with "press power button for recovery" - for 1 second) and powers off without usb cable attached. No reaction on usb cable attaching in this 2 seconds (and no response for power button being pushed while usb cable is connected).
- No reaction on usbboot at all (both battery connected or disconnected)

Any ideas?






mercredi 24 décembre 2014

Xperia Z C6603 Dead BootLoader Please Help topic






My Xperia Z C6603 BootLoader is Dead. I've found a way to restore the BootLoader in the link: http://sony.yt/topic/7324-english-tu...3-c6606-c6616/
Here the post says to connect the test point to ground, I need to know how to connect to ground the test point in C6603 and when to connect USB and when to click TestReady and Ready.
I get the following error message while performing the steps:
# will use DLOAD protocol ...
# 0808010600900000
# 0D0F50424C5F446C6F6164564552322E30
# 162001000100
# 17004001000100E1907100
# 1801001EA8B0C1B209C88CBB3E220F0AC00F6E6520A273D516 B40E7F2EAEB0E5B3DB8B
# PHONE NOT SUPPORTED IN THIS MODE.


Please Help.






dimanche 21 décembre 2014

HTC One M8, Sensor Hub partition dead topic






Hello everyone,

since 2 days im trying to restore my M8 too stock. I tried all ways, via RUU, nandroid backups etc. I always flashed the firmwares, made sure I did everything the way it is supposed to be.
But every flash ends with the same ending: Either the phone wont boot into android at all, or all sensors and the camera wont work.
When i open the camera app, there is a black screen displayed for like 4 secs, and then im straight back at the home screen. I can see the shutter button, but nothing happens when i press it.
Furthermore, no sensor works. Orientation is dead, proximity, light, everything. There is also a 2 sec delay between pressing the power button and the screen coming to life.

After doing everything again step by step i discovered something, that might cause everything. While flashing the firmware, the CMD gives me following lines: (cut-out)

(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=6

(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=7

(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=8

(bootloader) start image[sensor_hub] unzipping & flushing...
(bootloader) [RUU]UZ,sensor_hub,0
(bootloader) [RUU]UZ,sensor_hub,100
(bootloader) ..... Bypassed
(bootloader) current_image_number=9

(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,99
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) current_image_number=10

as you can see, the RUU for the sensor hub isnt flashed how it should be. The CMD even stops for like 5 secs after displaying


(bootloader) start image[sensor_hub] unzipping & flushing...
(bootloader) [RUU]UZ,sensor_hub,0
(bootloader) [RUU]UZ,sensor_hub,100

After 5 secs, it continues with the line


(bootloader) .... bypassed


Is there some way to get the sensor hub working again? Im rly clueless and would be very happy if someone could help me!

Thank You!






samedi 20 décembre 2014

[Q] Dead touch strip after leaving on desk? topic






This is a weird one;
I'm a developer so naturally all my devices are plugged in lying on the desk, this Nexus 4 used to be my day-to-day phone, I got it on release from Google Play.

Within the first two weeks I got it I was commuting on the London Underground and it was a crammed train, so I got squashed and my Nexus 4 was crushed, adding a crack to the top of the back of the phone, I was upset but didn't think anything of it as it was cosmetic damage, so I bought the Google bumper for it and I've been happy since.

Today, device lying on desk, I use it daily for work, lying on the desk plugged in, today I was testing the a website with the browser and then I put it down, pick it up again and suddenly the T on the soft keyboard doesn't work, it only worked when I turned it to landscape.

I got a touch test app and it turns out I have a dead vertical strip from the bottom of the phone to the top that completely covers the T key on the Google keyboard.
Incredibly annoying.

Called up LG, they were organising the in-warranty repair, then they asked if there is any other damage, I mentioned that there is cosmetic damage at the back of the device from January 2013, but the device has been perfectly fine until just a moment ago.
At this, the help guy said because it has damage it is no longer in warranty. Great.
  • Is there a known software fix for this?

  • Is the warranty really voided from cracks on the back of the phone?

  • Do I need to repair it myself?

  • Does Google Play have a service to handle this or is it all through LG?


I'm a bit annoyed as it happened so spontaneously, and this crack on the back of the phone has meant it's been out of warranty nearly since I bought it.






dimanche 14 décembre 2014

My Device Vibration is dead ..!!!!!! topic






any idea guys :(
using cosmic Rom
vibration stop working with it own self this morning
power save mode checked its off
all options reviews and all good
tried factory reset, hard reset and and also flash the stock Rom
I've tried a lot of things
and search all forums with trying all solutions
now its not working is there any new idea






SCREEN - Light Bleed / Dead Pixels topic






Sent my first AM7 back to Amazon due to some screen issues. It was a silver model. My new black one is much better and only has a little Bleed in the top left corner. Being an lcd screen I expected a little as my Panasonic TV has this issue also.

Anyone else notice issues. You will only see them in darkness.






samedi 13 décembre 2014

Note II(n7100) dead - Motherboard replacement or buy new phone? topic






Hi, my 2 years old note II got hard bricked and now only option is to replace motherboard. I tried everything but no solution. Samsung service is charge 0 for that and I am damn confused whether to replace the motherboard or get a new phone costing 0 (Moto G 2nd Gen) since I am short of budget..

So my question is
1) Will the performance of note II be better than MotoG by just replacement of the motherboard? I don't game but i just need a good battery life and browsing
2) Is it worth getting new phone or just get MB replaced?

Please help :(






vendredi 12 décembre 2014

GPS dead after installing 5.0 OTA topic






Has this happened to anybody else? The GPS WAS working on my GPe, I used it frequently before the update. I've tried a multitude of different apps, but it's just dead Jim.

I don't really expect anyone to reply to this post, but I figured I'd just throw it out there.






jeudi 11 décembre 2014

[Q] Guys anyone upload Walking Dead: Season Two with all 5 episodes in english ? topic






Guys I'm try to search google but no use . I got a link of episode 1-3 but its in Russian language :( now anyone download all 5 episodes and upload for Mali GPU ? Please I need only English language .. I hope any one will help me .:):) if you can't upload then tell me any trick to download game episodes without WiFi .. I'm waiting for your replay .. Please help me ... :)






mercredi 10 décembre 2014

 

© 2013 Mobile Probleme. All rights resevered. Designed by Templateism

Back To Top