[RECOVERY & KERNEL ][F2FS] Support for f2fs topic

Hey guys,
i modify recovery and kernel to work with f2fs :)

- Recovery is Philz recovery with NULL kernel
- Kernel have modified fstab to mount f2fs partitions

I don't own the kernel, Kernel has been compiled by mdfzhi.
I only changed mountpoints and some bugs to get it work.

But it have modified fstab:
- cache is mounted in /dev/block/mmcblk0p25 as F2FS
- preload is mounted in /dev/block/mmcblk0p19 as EXT4
- data is mounted in /dev/block/mmcblk0p22 as F2FS

I switched it because f2fs require at least 200MB partition and cache have only about 100MB and preload about 300MB. - It will boost performance

Requirements:
- Nokia X
- installed system (like CM11, PAC etc.)

Installation:
0, THIS WILL CLEAR YOUR USERDATA AND CACHE, not SDCARD
1, download zip and unpack it
2, flash kernel and recovery with fastboot dont use flashify it will brick your phone
3, boot into recovery, it will get some errors like /data and /cache wont mount - just ignore this, it will work later
4, connect your phone to pc
5, run formater.bat or formater.sh - we must format this from pc because is ext4, after this is complete you can format data and cache from recovery (f2fs)
6, reboot and enjoy

If you found any bugs, tell me

Attached Files

formater.zip - [Click for QR Code] (12.56 MB)

Browse More Articles

Tweet

Written by dd

We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.