Hi everyone, I am fairly new to doing all this, but for last three days or so, I've been really frustrated due to not getting S-OFF on my HTC one s ville. I want to run Sense 6 ROM by Liberty, but was having lot of problems, so someone suggested I try to get S-OFF. I tried rumrunner like 5 times, but failed. Tried installing other ROMs and did it again, still failed, but this what did it.
1) FIRST, flash the following ROM (CM11S_ville_2.15_v3.1_kk-final, from this link http://forum.xda-developers.com/htc-...one-s-t2869703), it has its own Kernel, so just flash the boot.img as usual and flash the ROM.
2) Now go ahead and restart your phone and activate the debugging, etc. Also make sure SuperSu is in there, if not, then go ahead flash that again, then restart your phone and open the app to activate it.
3)HERE IS THE KEY NOW --> CHANGE YOUR KERNEL TO THIS --> bubba_kernel-2014-07-26_Ville (get it from http://forum.xda-developers.com/show....php?t=2134535). Download it from Post# 2 at the bottom under Donate and FOLLOW THE INSTRUCTIONS FROM POST #4
4), go ahead and let the phone turn on. Make sure SuperSu is still there and activated. Also set screen timeout to maximum, so it doesn't go blank on you, DEACTIVATE all screen locks as well.
4) Make sure all your drivers are up to date (FOLLOW all the instructions on http://rumrunner.us/instructions/)
5) Tip --> Follow this video step by step (key is to make a separate folder which has rumrunner and drivers together).
6) Run the rumrunner and don't forget to disable your antivirus software and firewell in your computer.
I am sure this will simply get you S-OFF easily.
It just needs an "unsecure kernel" and this one does the job :).
Here is all the other info of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.531.19
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3973mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
1) FIRST, flash the following ROM (CM11S_ville_2.15_v3.1_kk-final, from this link http://forum.xda-developers.com/htc-...one-s-t2869703), it has its own Kernel, so just flash the boot.img as usual and flash the ROM.
2) Now go ahead and restart your phone and activate the debugging, etc. Also make sure SuperSu is in there, if not, then go ahead flash that again, then restart your phone and open the app to activate it.
3)HERE IS THE KEY NOW --> CHANGE YOUR KERNEL TO THIS --> bubba_kernel-2014-07-26_Ville (get it from http://forum.xda-developers.com/show....php?t=2134535). Download it from Post# 2 at the bottom under Donate and FOLLOW THE INSTRUCTIONS FROM POST #4
4), go ahead and let the phone turn on. Make sure SuperSu is still there and activated. Also set screen timeout to maximum, so it doesn't go blank on you, DEACTIVATE all screen locks as well.
4) Make sure all your drivers are up to date (FOLLOW all the instructions on http://rumrunner.us/instructions/)
5) Tip --> Follow this video step by step (key is to make a separate folder which has rumrunner and drivers together).
6) Run the rumrunner and don't forget to disable your antivirus software and firewell in your computer.
I am sure this will simply get you S-OFF easily.
It just needs an "unsecure kernel" and this one does the job :).
Here is all the other info of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.531.19
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3973mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
0 commentaires:
Enregistrer un commentaire