As some others have mentioned, The power button on some of the Tudia Cygen cases applies too much pressure to the power button. The result is a super sensitive button push, or (in my case) a boot loop caused by it holding down the button. I was going to send it back, but by the time I paid return shipping it wouldn't be worth it. I decided to see if I could make it work with a little modification. Worst case scenario, I just blew .
Well, I'm happy to report I have a simple fix for the issue. I used a heat gun (a lighter will work in a pinch) to warm up the polycarbonate shell, then I bent it slightly outward at the power button. The button feedback is GREAT now. I hope this helps anyone else experiencing the issue.
Well, I'm happy to report I have a simple fix for the issue. I used a heat gun (a lighter will work in a pinch) to warm up the polycarbonate shell, then I bent it slightly outward at the power button. The button feedback is GREAT now. I hope this helps anyone else experiencing the issue.
Written by dd
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 commentaires:
Enregistrer un commentaire