CyanogenMod.
Official Site - www.cyanogenmod.org/
Optimization of 04.01.2015
Was based firmware cm-11-20150101-NIGHTLY-spyder
If you update the firmware lose optimization
Works well, consumes less power and not heated like crazy. Integrated full GApps (Let me explain: firmware does not need to install GApps)
Download: GSM | CDMA (coming soon)
Changes:
Integrated micro GApps
Full ODEX
Optimizing all Apk and Jar
Optimizing build for GSM
Problems\Bugs:
- animation does not work properly the lock screen (if you turn off - flashing) - (solved by turning off animations in settings (Settings / Display / CRT-effect> Hide))
- function does not work turn on the flashlight by double tap on the lock icon
- happens that if you call the Slim Recents after coagulation / close a running application, it just will not produce
Installation instructions:
Boot Menu Manager (BMM):
In Boot Menu Manager to install the firmware, you can choose any slot, but still in the first recommended to keep the most stable firmware on your mind.
1. To install, select the desired slot or create it. The second slot is not necessary to create, it will be under /webtop (this is more convenient, since you are not limited in the amount of memory for the System, Dalvik and Cache), and the third and subsequent need.
2. Go to "Mounts & Format" and select "/format system". Next you need to select "Wipe & Clean" and clear sections "Data", "Cache", "Dalvik Cache" (this item is recommended to perform three times).
3. Next you need to select "Install Zip Package" (firmware must be in the internal memory) and specify the path to the firmware, then again to clear sections "Cache" and "Dalvik Chache"
4. Then select "Reboot" and indicate that the system in which you have to boot.
SafeStrap (SS):
It is not recommended to make changes in katabatic section (especially wipe system), otherwise there is a risk that will fly recovery.
1. Create a new partition in SafeStrap (if it does not already exist).
Parameters: System 1000mb, Data 2000mb (here it is possible to fit your needs, this section is used for your application), Cache 350mb.
2. Select "Wipe" -> "Advanced Wipe" -> checkmark "Dalvik", "Cache", "System", 'Data", "Android Secur"e -> Make swipe "Swipe to Wipe". It is recommended to repeat the procedure three times.
3. Select "Install" -> specify the path to the firmware -> Make a swipe "Swipe to Confirm Flash"
4. After all files are installed, press "Reboot System"
It is strongly recommended to install all the files from the internal memory!
Note: I am install (and use) in BMM a second system (instead of the webtop) all is well =). If you are using SafeStrap (SS) to install (recommend) to first system
Tested on SafeStrap.
*AIO (All In One) - ROM + micro GApps
Official Site - www.cyanogenmod.org/
Optimization of 04.01.2015
Was based firmware cm-11-20150101-NIGHTLY-spyder
If you update the firmware lose optimization
Works well, consumes less power and not heated like crazy. Integrated full GApps (Let me explain: firmware does not need to install GApps)
Download: GSM | CDMA (coming soon)
Changes:
Integrated micro GApps
Full ODEX
Optimizing all Apk and Jar
Optimizing build for GSM
Problems\Bugs:
- animation does not work properly the lock screen (if you turn off - flashing) - (solved by turning off animations in settings (Settings / Display / CRT-effect> Hide))
- function does not work turn on the flashlight by double tap on the lock icon
- happens that if you call the Slim Recents after coagulation / close a running application, it just will not produce
Installation instructions:
Boot Menu Manager (BMM):
In Boot Menu Manager to install the firmware, you can choose any slot, but still in the first recommended to keep the most stable firmware on your mind.
1. To install, select the desired slot or create it. The second slot is not necessary to create, it will be under /webtop (this is more convenient, since you are not limited in the amount of memory for the System, Dalvik and Cache), and the third and subsequent need.
2. Go to "Mounts & Format" and select "/format system". Next you need to select "Wipe & Clean" and clear sections "Data", "Cache", "Dalvik Cache" (this item is recommended to perform three times).
3. Next you need to select "Install Zip Package" (firmware must be in the internal memory) and specify the path to the firmware, then again to clear sections "Cache" and "Dalvik Chache"
4. Then select "Reboot" and indicate that the system in which you have to boot.
SafeStrap (SS):
It is not recommended to make changes in katabatic section (especially wipe system), otherwise there is a risk that will fly recovery.
1. Create a new partition in SafeStrap (if it does not already exist).
Parameters: System 1000mb, Data 2000mb (here it is possible to fit your needs, this section is used for your application), Cache 350mb.
2. Select "Wipe" -> "Advanced Wipe" -> checkmark "Dalvik", "Cache", "System", 'Data", "Android Secur"e -> Make swipe "Swipe to Wipe". It is recommended to repeat the procedure three times.
3. Select "Install" -> specify the path to the firmware -> Make a swipe "Swipe to Confirm Flash"
4. After all files are installed, press "Reboot System"
It is strongly recommended to install all the files from the internal memory!
Note: I am install (and use) in BMM a second system (instead of the webtop) all is well =). If you are using SafeStrap (SS) to install (recommend) to first system
Tested on SafeStrap.
*AIO (All In One) - ROM + micro GApps
Written by dd
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 commentaires:
Enregistrer un commentaire