Hi all,
This is my first post here, following my upgrade from a venerable Nexus 7 (2012) to a Tab S 8.4 in November. I'm grateful for the numerous posts in the XDA community that instructed me on things such as disabling the capacitive buttons, so I thought I'd share some feedback on a couple of cases for which I don't see much discussion.
I started out with a rooCase Origami that I purchased from Amazon, because I wanted the ability to stand the tablet in portrait mode while keeping a reasonably slim profile. I really liked that the case added minimal bulk to the tablet, but the floppy, multi-fold cover was annoying, mostly because the magnets couldn't hold it closed. Also, the tablet didn't stand too well in portrait mode (tap a little too hard on the screen and the kickstand would give away). So, I returned the Origami in favour of a GearIT 360 spinner (also via Amazon).
The GearIT case has proven to be perfect for my needs. The tablet is very secure in the cradle, but pops out easily when you need it (which is necessary to access the card slots). The speakers, camera, ports, and IR blaster are fully exposed, and the camera is deeply recessed so it'll be hard to scratch the lens. The exterior is a twill fabric that's really nice to grip, and the magnets are reliable for waking the tablet and keeping the cover closed. As well, the cover folds in such a way that the soft inside rarely touches other surfaces (unless you fold it back like a magazine), so it won't leave dirt and debris on your screen. I've also been pleasantly surprised that the case hasn't attracted much cat hair (which is easy to clean off with a sticky roller or tape).
The 360-degree rotation enables you to stand the case in a variety of ways while maintaining a surprisingly slim profile for the tablet, and the best part is that you can properly use all of the angles available to you. With non-rotating cases (such as the Origami and Samsung Book Cover), you sometimes find that the screen will be upside down in landscape mode (when apps only rotate in one direction). You can solve this with an app to force screen rotation, but with the GearIT you just turn the tablet around 180 degrees. This also means that the power/volume keys are always on the top when in landscape mode. One of my favorite ways to use the case is to fold it into landscape typing mode (lowest angle), then rotate the tablet into portrait mode. It's the same effect as propping up one end of the tablet on a book.
After about five weeks of daily use, the case still feels solid. The folds are definitely looser than when I first got it, but that's to be expected given how often they're flexed. The rotating hinge ratchets so that your tablet doesn't swing around at will, and it's still nice and tight.
Perhaps the only thing I don't like is that the chrome trim doesn't match the bronze trim on the tablet. Although if I had a choice, I would have taken chrome over bronze...
Cheers!
This is my first post here, following my upgrade from a venerable Nexus 7 (2012) to a Tab S 8.4 in November. I'm grateful for the numerous posts in the XDA community that instructed me on things such as disabling the capacitive buttons, so I thought I'd share some feedback on a couple of cases for which I don't see much discussion.
I started out with a rooCase Origami that I purchased from Amazon, because I wanted the ability to stand the tablet in portrait mode while keeping a reasonably slim profile. I really liked that the case added minimal bulk to the tablet, but the floppy, multi-fold cover was annoying, mostly because the magnets couldn't hold it closed. Also, the tablet didn't stand too well in portrait mode (tap a little too hard on the screen and the kickstand would give away). So, I returned the Origami in favour of a GearIT 360 spinner (also via Amazon).
The GearIT case has proven to be perfect for my needs. The tablet is very secure in the cradle, but pops out easily when you need it (which is necessary to access the card slots). The speakers, camera, ports, and IR blaster are fully exposed, and the camera is deeply recessed so it'll be hard to scratch the lens. The exterior is a twill fabric that's really nice to grip, and the magnets are reliable for waking the tablet and keeping the cover closed. As well, the cover folds in such a way that the soft inside rarely touches other surfaces (unless you fold it back like a magazine), so it won't leave dirt and debris on your screen. I've also been pleasantly surprised that the case hasn't attracted much cat hair (which is easy to clean off with a sticky roller or tape).
The 360-degree rotation enables you to stand the case in a variety of ways while maintaining a surprisingly slim profile for the tablet, and the best part is that you can properly use all of the angles available to you. With non-rotating cases (such as the Origami and Samsung Book Cover), you sometimes find that the screen will be upside down in landscape mode (when apps only rotate in one direction). You can solve this with an app to force screen rotation, but with the GearIT you just turn the tablet around 180 degrees. This also means that the power/volume keys are always on the top when in landscape mode. One of my favorite ways to use the case is to fold it into landscape typing mode (lowest angle), then rotate the tablet into portrait mode. It's the same effect as propping up one end of the tablet on a book.
After about five weeks of daily use, the case still feels solid. The folds are definitely looser than when I first got it, but that's to be expected given how often they're flexed. The rotating hinge ratchets so that your tablet doesn't swing around at will, and it's still nice and tight.
Perhaps the only thing I don't like is that the chrome trim doesn't match the bronze trim on the tablet. Although if I had a choice, I would have taken chrome over bronze...
Cheers!
Written by dd
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 commentaires:
Enregistrer un commentaire