Hello,
Recently I purchased the Tronsmart MK908II and am hoping to make it work with a touch screen located here http://www.cvtouch.com/. Now the company has stated that it will work with Android version 4.2.2 and Kernel version 3.0.36+. They have provided an android driver(a patch file), but they say "your SW engineer need to add it into the kernel".
So my question is, how difficult will it be to patch the kernel, and if not too hard, what are the tools/software I would need to make this happen?
They did originally recommend the Podoor 518 android box, but I only saw one on Amazon and wasn't sure about buying something that seems a bit older. Any guidance or help would be appreciated, thanks!!
Also the most I've done is follow directions to root/unlock some cell phones and install custom roms. I somewhat understand what is going on there, but have little to no idea about the magic behind that.
I've also attached the patch file? and the driver folder
The instructions with the patch file are as follows:
Support CVTouch Multitouch Simple User Manual
Modify your kernel source code refer to drivers\hid files.
1 kernel3.0+\drivers\hid\hid-ids.h
Define CVTouch VID/PID macro in about line 209.
2 Kernel3.0+\drivers\hid\hid-core.c
Add CVTouch VID/PID to struct hid_have_special_driver in about line 1378 to 1538.
3 Kernel3.0+\drivers\hid\hid-multitouch.c
Modify the CVTouch VID/PID at array mt_devices[] in about line 624 to 2054.
4 Confirm if the drive have added the hid-multitouch module in kernel config file.
Run make menuconfig in command terminal to select HID Multitouch panels.
Device Drivers --->
HID Devices --->
Special HID Drivers --->
HID Multitouch panels
Recently I purchased the Tronsmart MK908II and am hoping to make it work with a touch screen located here http://www.cvtouch.com/. Now the company has stated that it will work with Android version 4.2.2 and Kernel version 3.0.36+. They have provided an android driver(a patch file), but they say "your SW engineer need to add it into the kernel".
So my question is, how difficult will it be to patch the kernel, and if not too hard, what are the tools/software I would need to make this happen?
They did originally recommend the Podoor 518 android box, but I only saw one on Amazon and wasn't sure about buying something that seems a bit older. Any guidance or help would be appreciated, thanks!!
Also the most I've done is follow directions to root/unlock some cell phones and install custom roms. I somewhat understand what is going on there, but have little to no idea about the magic behind that.
I've also attached the patch file? and the driver folder
The instructions with the patch file are as follows:
Support CVTouch Multitouch Simple User Manual
Modify your kernel source code refer to drivers\hid files.
1 kernel3.0+\drivers\hid\hid-ids.h
Define CVTouch VID/PID macro in about line 209.
2 Kernel3.0+\drivers\hid\hid-core.c
Add CVTouch VID/PID to struct hid_have_special_driver in about line 1378 to 1538.
3 Kernel3.0+\drivers\hid\hid-multitouch.c
Modify the CVTouch VID/PID at array mt_devices[] in about line 624 to 2054.
4 Confirm if the drive have added the hid-multitouch module in kernel config file.
Run make menuconfig in command terminal to select HID Multitouch panels.
Device Drivers --->
HID Devices --->
Special HID Drivers --->
HID Multitouch panels
Written by dd
We are Creative Blogger Theme Wavers which provides user friendly, effective and easy to use themes. Each support has free and providing HD support screen casting.
0 commentaires:
Enregistrer un commentaire